Elevator EXP - MC Step-up Amplifier.
Low output moving coil (MC) with output in the region of 0.15 - 0.8 mV (ref 1kHz at 5cm/sec)
The Elevator EXP must always be used between cartridge and a moving magnet sensitivity input. It must never be used 'post EQ' - after the moving magnet phono preamp.
Input range 0.15mV to 0.8mV
Output (for input range) 2mV to 10mV, suitable for a moving magnet phono stage input
Maximum input 378mV rms (a very large overload margin)
Maximum output 4.914V rms
Gain 22dB (13) < 10Hz to 917kHz (-3dB points)
Input impedance 23, 30, 100, 840, 1000, 5100 and 47000 Ohms
Output (driving/source) impedance 300 Ohm
Recommended load impedance 47k Ohms phono stage preamp input
Noise at output -99dB CCIR Q-pk
Frequency response < 10Hz to 917kHz (-3dB points)
Channel balance 0.2dB
Channel separation 64dB
Size (approx.) W: 107 x H: 50 x D: 180 (mm) inc. jacks